Find ZR-D005 ABS Electric Magnetic Coils, Wabco Truck Part 4420012221/0005433785/4420015221, Ecas System Hole 11mm Solenoid Coils on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Home > Products > Car Brake Pad > Air Brake System Auto Solenoid Coil

Air Brake System Auto Solenoid Coil

  • Air Brake System Auto Solenoid Coil
  • Air Brake System Auto Solenoid Coil
  • Air Brake System Auto Solenoid Coil
  • Air Brake System Auto Solenoid Coil

Air Brake System Auto Solenoid Coil

    Payment Type: L/C,T/T,Paypal,Money Gram,Western Union
    Terms of Trade: FOB,CFR,CIF,EXW
    Min. Order: 1 Piece/Pieces
    Delivery Time: 5-8 Days
    Packaging: Plastic bag,Boxes,Carton,Pallet
    Productivity: 200000 pcs per month
    Brand: Brando
    Transportation: Ocean,Land,Air
    Place of Origin: China Ningbo
    Supply Ability: 50000 pcs per week
    Certificate: CE
    Port: Ningbo,Shanghai,Tianjin

Basic Info

Model No.: BB11040042

Product Description

Air Brake System Auto Solenoid Coil


ABS Auto solenoid valve coils control process:
1) Inflation process:
When the driver steps on the brake pedal, the car begins to decelerate. At this time, the wheel is not immediately locked, ABS can not afford the effect; the intake valve control coil and the exhaust valve control coil are not energized, the intake and exhaust ports of the solenoid valve are connected, which is equivalent to a straight-through joint.

2) Exhaust process:
Following the constant inflation of the brake chamber, the braking force of the tire is getting bigger and bigger, and the wheel gradually becomes locked. The ABS control unit will properly release the air in the brake chamber to avoid the wheel lock. This process is the exhaust process.

When exhausting, the intake valve control coil is energized, and the exhaust valve control coil is also energized, so that the air inlet is sealed, and the air outlet is connected to the exhaust port to complete the exhaust operation.

3) Pressure keeping process:
When the brake chamber is exhausted, not all the air in the brake chamber is released, only a part is released. When the ABS control unit detects that the wheel is no longer locked, the exhaust will be turned off, and the system will be closed. The air pressure in the moving air chamber is unchanged, and the pressure is maintained. In this way, for a period of time, the braking force will remain unchanged and the wheels will not lock.

When the pressure is maintained, the intake valve control coil is energized, and the exhaust valve control coil is de-energized. The air inlet is still sealed, and the air outlet is sealed to complete the pressure.


Technical data of ZR-D005 Air Brake System Auto Solenoid Coils:

Model BB11040042
Normal voltage DC24V; or Customized
Normal power DC: 8W
Insulation class H
Connection type Electrical outlet type
Application WABCO/Ecas truck air brake system solenoid coils
Weight 173 g
Hole diameter 11 mm
Height 40 mm

Overall dimension of ZR-D005 ABS 11mm Hole Diameter Electric Magnetic Coils:
Overall dimension of ZR-D005 ABS 11mm Hole Diameter Electric Magnetic Coils


Details enlargement of Wabco Truck Part Solenoid Coils 4420012221/0005433785/4420015221:

:


Other Ecas System Hole Size 11mm Auto electromagnetic coils for your reference:

Other Ecas System Hole Size 11mm Auto electromagnetic coils for your reference

Other Ecas System Hole Size 11mm Auto electromagnetic coils for your reference


Brief introduction of ABS (air brake system with ZR-D005 solenoid coils):

ABS is a mechanism that brakes the entire vehicle with the damping effect of engine compression. When the air brake system works, the brake valve plate closes the exhaust pipe, and the linkage lever pulls the throttle lever oil pump to stop the oil supply, which is the compressor becomes the compressor, and the air brake system valve plate prevents the compressed gas from being discharged, At this time, the whole vehicle is traveling with the gear, and the air brake system has a braking effect on the whole vehicle.

The function of the air brake is the parking brake. After stopping, the compressor pump stops working, there is no air pressure in the brake system, the brake brake spring is extended, and the Brake Pad is pushed to lock the brake drum. Prevent slipping. After the vehicle is started, the air pump works to the specified air pressure and then compresses the air brake spring to relax the brake drum. The vehicle can run normally.

The working principle of the pneumatic brake system: the air compressor driven by the engine first inputs the compressed air into the wet gas storage tank through the one-way valve. After the compressed air is cooled in the wet gas pipeline and separated by oil and water, it is divided into two loops: one loop The middle chamber of the air reservoir and the double chamber brake valve leads to the rear brake chamber; the other circuit passes through the lower chamber of the air reservoir and the double chamber brake valve to the front brake chamber. When one of the loops fails, the other loop can continue to work to ensure that the car has a certain braking capacity, thus improving the safety of the car.


Welcome to your inquiry!

NINGBO BRANDO HARDWARE CO.,LTD

 

Ningbo Brando Hardware Co LtdBrando is a professional manufacturer and designer of solenoid valve, solenoid coil and solenoid valve armature assembly, located in Ningbo, China. Our main products include armature assembly, solenoid coil, brass solenoid valve, stainless steel solenoid valve, plastic solenoid valve, pneumatic solenoid valve, pulse jet valve, diaphragm repair kit, pulse controller, injector rail and can serve customers from various industries. Our company has been producing for more than 10 years, and cooperates with different customers such as oil & gas, chemical industry, water treatment, food & beverage, medical system and so on.

Brando maintains its high position in the industrial manufacturing. The advanced lathes and milling machinery are introduced, and from materials procurement to finished product and assembly, it is fully automated and controlled by computers, to improve product quality, and to continuously increase production and delivery efficiency.

Brando has fully adopted the ISO-9001 quality management system and introduced the most advanced precision equipment for product inspection, such as digital pressure gauges, computer applications, air leak testers, pressure testers and flow testers.


banner 2


Main Services:
1. Customized Design and Production: Brando can design and manufacture customized solenoid valves, solenoid coils and solenoid valve armature components to meet your specific needs and applications. We can provide services from small air treatment devices to large fluid systems.

2. Quality Assurance: In addition to designing and manufacturing high-quality products, Brando also provides 100% testing services for all components to ensure that they achieve the best performance under the best performance and to ensure that it runs well in your project.

3. Delivery and After-sales Service: Brando provides large inventory and on-time delivery within 5 to 10 days. We also provide unparalleled after-sales service and 1 year warranty for all products.


Product range:

1. Solenoid Coil
2. Solenoid Armature/Stem
3. 5/2, 5/3, 3/2, 2/2 Way Pneumatic Valve
4. Refrigeration Solenoid Valve
5. Dust Collector Pulse Jet Valve
6. Diaphragm Repair Kit
7. Pulse Controller
8. Brass Solenoid Valve
9. Stainless Steel Solenoid Valve
10. Plastic Solenoid Valve
11. Injector Rail


Focus On Your Demands, Offer You Best Solution!

Company Info

  • Company Name: NINGBO BRANDO HARDWARE CO.,LTD
  • Representative: Lu Jin Jun
  • Product/Service: Solenoid Valve Armatures , Solenoid Valve Coils , Pneumatic Solenoid Valves , Pneumatic Cylinders , Pulse Jet Diaphragm Valves , Pneumatic Components
  • Capital (Million US $): 1000,000RMB
  • Year Established: 2008
  • Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
  • Export Percentage: 81% - 90%
  • Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
  • No. of Production Lines: 10
  • No. of R&D Staff: 5 -10 People
  • No. of QC Staff: 11 -20 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 3,000-5,000 square meters
  • Factory Location: Ningbo
  • Contact Person: Mr. Brandon Bao
  • Tel: 86-0574-83879820
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters